Resin extruded products - List of Manufacturers, Suppliers, Companies and Products

Resin extruded products Product List

1～11 item / All 11 items

Displayed results
[Development and Manufacturing Case] Sube Up (1)

[Development and Manufacturing Case] Sube Up (1)

Reduction of opening and closing force achieved! Introducing development and manufacturing examples of Slip Up.

As an expert in the extrusion molding of rubber and resin, we would like to introduce the development and manufacturing examples of Hottipolymer, which has assisted various companies. "Sube Up" is a high-sliding, wear-resistant resin extrusion product coated with a special lubricating resin. Generally, polyolefin-based elastomers are materials that disperse rubber within the resin, resulting in a surface of the extruded product that is not very slippery. When used as sealing materials or gaskets, they tend to adhere easily to the counterpart material. Our product is an irregularly shaped extruded product that is simultaneously molded with a thin film of special lubricating resin, which helps prevent adhesion and improve sliding properties. [Case Study] <Related to Sashes> ■ Composite sashes have become heavier in recent years, making them more difficult to open and close. 　→ By adopting Sube Up for the sash, the opening and closing becomes smoother, achieving a reduction in the force required to operate it. *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Studies Available] Thermoplastic Resin Extruded Products

[Case Studies Available] Thermoplastic Resin Extruded Products

Materials that are easy to mold and recycle.

* Material: Resin * Lot: 100 to 1000 pieces * Accuracy: Approximately ±1 to 5mm

  • Exterior tiles
  • Interior and exterior tiles
  • Tile work

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Product Example] ASA with Rigid Wood Powder + Foamed ABS

[Product Example] ASA with Rigid Wood Powder + Foamed ABS

Excellent cost-effectiveness as there is no need for painting! It can be shaped into artificial wood that is close to natural wood.

Here is an example of "ASA with hard wood powder + foamed ABS." It excels in cost-effectiveness as there is no need for painting, and by mixing wood powder with resin, it is possible to mold artificial wood that is close to natural wood. Compared to natural wood, it is resistant to corrosion and has less deformation and discoloration. Our company supports various challenges in extrusion molding, from product planning to OEM and production transfer from other factories. Please feel free to contact us when needed. [Example] ■ Application: Resin profile ■ Material: ASA resin with wood powder, ABS resin ■ Precision: ±0.3 ■ Processing method: Extrusion molding, two-color molding *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Product Example] ASA with Rigid Wood Powder + Foamed ABS (Square Hole)

[Product Example] ASA with Rigid Wood Powder + Foamed ABS (Square Hole)

By mixing wood powder with resin, you can mold artificial wood that is close to natural wood!

Here is an example of "ASA with hard wood powder + foamed ABS (square hole)." Compared to natural wood, it is resistant to corrosion, has less deformation and discoloration, and by mixing wood powder with resin, it is possible to mold artificial wood that is close to natural wood. It is cost-effective as there is no need for painting. Our company supports various extrusion molding challenges, from product planning to OEM and production transfer from other factories. Please feel free to contact us when needed. 【Example】 ■ Application: Resin profile ■ Material: ASA resin with wood powder, ABS resin ■ Precision: ±0.3 ■ Processing method: Extrusion molding, two-color molding *For more details, please refer to the PDF materials or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Resin Extrusion Molding

Resin Extrusion Molding

We also handle manufacturing from mold design! The molds for extrusion molding are small, and production is speedy and inexpensive!

"Resin extrusion molding" is a method in which heated and softened resin is continuously poured into a mold with holes and extruded like tokoroten to form the desired shape. There are three types of molding methods available for selection based on application. In particular, PVC foam extrusion molding is challenging, and there are few companies capable of it, making it a technology we can confidently offer. To date, we have produced over 10,000 products, creating 285 molds each year, which amounts to nearly one mold per day. We handle everything from product design to mold design. [Materials] ■ PA6 ■ PE ■ PVC (rigid) ■ PVC (flexible) ■ POM ■ ABS *For more details, please refer to the PDF document or feel free to contact us.

  • m20.png
  • m23.png
  • m24.png
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Resin Interior Window (Residential)

[Case Study] Resin Interior Window (Residential)

We will introduce case studies of the installation of "resin inner windows," which are recommended for insulation and soundproofing.

The components of resin interior windows require multi-color options that are easy to coordinate with various rooms. We produce three wood grain colors that have the texture of wood and two simple monochrome colors for use in resin interior windows. 【Products Used】 ■ Rigid Resin Extruded Profiles We handle everything from mold design to processing in-house for extruded products, allowing us to flexibly accommodate various cross-sectional shapes. We can also manufacture using three types of materials simultaneously, tailored to specific applications. ■ Soft Molded Products - Rigid and Soft Simultaneous Molded Products (Glazing Gaskets) Simultaneous molding of rigid and soft resin materials is possible. ■ Injection Molded Parts (such as rollers) Plastic heated to a softening temperature is injected under pressure into a mold, filling it to form the desired shape. We also accommodate small lot production of a variety of products. *For more details, please contact us or download the PDF materials for further information.

  • Insulated aluminum sash
  • Aluminum sash
  • Synthetic resin fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
We will address the challenges from design to mass production of "resin extrusion molding"!

We will address the challenges from design to mass production of "resin extrusion molding"!

Do you have any concerns with resin extrusion molding? We will address all seven common challenges from design to mass production at every stage!

Are you facing any of the following issues in "resin extrusion molding"? ■ The prototype went well, but there are many problems in mass production... ■ There are quality troubles... ■ Many issues at the cooperating factory... ■ Struggling with setup changes... ■ The cooperating factory has gone out of business... ■ Can't find molds that meet requirements like thin walls and lightweight... ■ Want to bring a design to life but can't do it successfully... Since our establishment in 1975, we have been a comprehensive plastic molding manufacturer that consistently handles everything from the production of molding processing molds to product assembly, starting with extrusion molding and injection molding based on plastic materials. We have responded to many customer requests since our founding. We can assist with all your concerns, from consultations on "resin design and mold design" to "mold production," "prototyping," and "mass production." If any of the above applies to you, please feel free to consult with us! *For more details, please refer to the materials or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Product Example] V Corner

[Product Example] V Corner

It is used as a spacer material to fill the gaps in the flooring, inserted between the floor and the corner of the pillar.

Here is an example of the "V corner." It is used as a spacer material that fits between the floor and the corner of the column, filling the gaps in the flooring. Our company supports various challenges in extrusion molding, from product planning to OEM and production transfer from other factories. Please feel free to contact us when needed. [Example] ■ Application: V corner ■ Material: Soft PVC ■ Precision: ±0.3 ■ Processing method: Extrusion molding of soft resin *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Product Example: Wire-Inserted Soft Molding

Product Example: Wire-Inserted Soft Molding

A molding method that simultaneously extrudes soft resin and wire! It can suppress the shrinkage of soft resin.

Here is an example of "soft molding with wire." By incorporating wire, the shrinkage of soft resin can be suppressed. This is a molding method that extrudes soft resin and wire simultaneously. Our company supports various challenges in extrusion molding, from product planning to OEM and production transfer from other factories. Please contact us when needed. 【Example】 ■ Application: Tight materials ■ Material: Soft PVC ■ Precision: ±0.3 ■ Processing method: Extrusion molding of soft resin *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Development and Manufacturing Case] Sub Up (2)

[Development and Manufacturing Case] Sub Up (2)

Contributing to improved cleanliness! Introducing examples of development and manufacturing of slip-up.

As experts in the extrusion molding of rubber and resin, we would like to introduce the development and manufacturing examples of Hottipolymer, which has assisted various companies. "Sube Up" is a high-sliding, wear-resistant resin extrusion product coated with a special slippery resin. Generally, polyolefin-based elastomers are materials in which rubber is dispersed within the resin, making the surface of the extruded products less slippery. When used as sealing materials or gaskets, they tend to adhere easily to the counterpart materials. Our product is an irregularly shaped extruded product that is simultaneously molded with a thin film of special slippery resin, which helps prevent adhesion and improve sliding properties. 【Case Study】 <Related to residential equipment> ■ TPO is used for bathtub joints, but mold is growing 　→ By adopting Sube Up, cleanliness has improved, and product performance has increased 　→ The need for mold inhibitors has been eliminated, resulting in cost reductions *For more details, please refer to the PDF materials or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Development and Manufacturing Case] Sub Up (4)

[Development and Manufacturing Case] Sub Up (4)

Eliminating adhesion! Introducing examples of development and manufacturing of slip-up.

As experts in the extrusion molding of rubber and resin, we would like to introduce the development and manufacturing examples of Hottipolymer, which has assisted various companies. "Sube Up" is a high-sliding, wear-resistant resin extrusion product coated with a special lubricating resin. Generally, polyolefin-based elastomers are materials in which rubber is dispersed in the resin, making the surface of the extruded products less slippery. When used as sealing materials or gaskets, they tend to stick to the counterpart materials. Our product is an irregularly shaped extruded product that is simultaneously molded with a thin film of special lubricating resin, which helps prevent sticking and improve sliding properties. [Case Study] <Automotive and Sash-related> ■ When trying to open a closed state, it becomes stuck and difficult to open and close. 　→ By adopting Sube Up, a layer is formed between the product, eliminating sticking. *For more details, please refer to the PDF materials or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Resin extruded products

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.